Bathroom Single Lever Mixer Tap Price For Sale OEM Company

Installing a brass bathroom single lever mixer tap can greatly enhance the functionality and aesthetic of your bathroom. These taps offer a seamless blend of hot and cold water through a single lever, making it easy to achieve the desired temperature.

Tools and Materials Needed

Before beginning the installation, gather the necessary tools and materials. Having everything on hand will streamline the process. You will need:

Adjustable wrench

Screwdriver

Plumber's tape

Basin wrench

Bucket or towel (for catching any water)

New brass bathroom single lever mixer tap

Water supply hoses (if not included with the tap)

Preparing for Installation

1. Turn Off Water Supply

The step in installing your brass bathroom single lever mixer tap is to turn off the water supply. Locate the shut-off valves under the sink and turn them clockwise until they are fully closed. If your bathroom doesn’t have individual shut-off valves, you may need to turn off the main water supply to your home.

2. Clear the Area

Ensure that the area around the sink is clean and free from clutter. This will provide you with ample space to work and make the installation process smoother. Remove any items from the sink area, including towels, toiletries, and decorative items.

3. Remove the Old Tap (if applicable)

If you are replacing an existing tap, you will need to remove it. Use your adjustable wrench to disconnect the water supply hoses from the old tap. After disconnecting the hoses, use a basin wrench or a screwdriver to loosen and remove the mounting nuts holding the old tap in place. Carefully lift the old tap out and clean the sink surface to remove any debris or old sealant.

Installing the Brass Bathroom Single Lever Mixer Tap

4. Read the Manufacturer’s Instructions

Before proceeding, read the manufacturer’s installation instructions that come with your new brass bathroom single lever mixer tap. Each tap may have specific requirements, and following these guidelines will ensure proper installation.

5. Attach the Mounting Hardware

Most brass bathroom single lever mixer taps come with mounting hardware. Place the rubber or silicone gasket provided onto the base of the tap. This will create a watertight seal when installed. Position the tap over the sink hole, ensuring it is centered.

6. Secure the Tap in Place

From underneath the sink, attach the mounting nuts to the threaded shank of the tap. Use a basin wrench to tighten the nuts securely, but be careful not to overtighten, as this can damage the tap or the sink.

7. Connect the Water Supply Hoses

Once the tap is secure, it’s time to connect the water supply hoses. If the hoses are not included with your new tap, you may need to purchase compatible ones. Wrap plumber's tape around the threads of the water inlet connections on the tap to prevent leaks. Then, connect the hot and cold water supply hoses to the corresponding connections. Use an adjustable wrench to tighten them, ensuring a snug fit without overtightening.

8. Install the Drain Assembly (if applicable)

If your new tap includes a drain assembly, follow the manufacturer’s instructions for installation. Typically, this involves attaching the drain body to the sink and connecting the lift rod mechanism to the tailpiece.